Every product you buy from veritasconsults.com is backed first by the product manufacturerās or supplierās warranty. Caribbean Identityās standard one year warranty may also apply.Ā To determine if the product you wish to purchase qualifies for our warranty or that of the supplier/manufacturer or if other coverage applies please contact us.
WSK-WGI SWIFT Gateway
WSK-WGI is the wireless fire system gateway that acts as a bridge between the fire alarm control panel (FACP) and wireless fire devices. The wireless gateway uses mesh technology to communicate with the devices and offers high reliability for commercial applications. The WSK-WGI can be installed anywhere on the SLC and is an excellent solution for retrofits and āhard to wireā applications. Note: Must be used with Silent Knight 6000 Series addressable fire alarm control panels.
Description
WSK-WGI SWIFT GatewayĀ Features and Benefits
- One Gateway is required for each wireless mesh used in a SWIFT installation.
- The maximum number of gateways on a system is limited by the number of available SLC addresses or a maximum of 4 gateways within a common wireless range.
- SK Protocol only. SWIFT does not work with SD Protocol.
- It is highly recommended that the W-USB transceiver with SWIFT Tools be used to make the site survey, installation, and diagnostics easier to complete and interpret.
- SWIFT provides options for wireless detection through a proprietary Class A mesh network. It is ideal for hard-to-wire locations, buildings where new wiring is not allowed, or to provide an easy-install fire system for new construction projects. SWIFT devices can also be combined with hard-wired devices.
Shipping & Delivery
ONLINE ORDERS
SHIPPING & DELIVERY
- All orders placed before 12PM Monday to Friday are processed the same day.
- Local orders are made available for Pickup / Delivery at your discretion.
- Regional orders are shipped via a registered courier and tracking information provided as soon as it becomes available.
We seek to expedite all orders in the shortest possible time frame.Ā If your order is part of a project contracted with us, equipment delivery will be provided as part of the project outline.
Related products
Red FPLR Fire Alarm Cable
This 1000 foot red 18/2 fire alarm / security cable comes in an easy to use pull box. The cable is composed of 2 18 AWG (American Wire Gauge) wires inside of a FPLR rated outer jacket. The primary use of this cable is for power limited fire circuits, but it also finds use in the wiring of security systems. (Often one finds the two systems are closely tied together.)
Our security/fire alarm cables listed as FPLR (Fire-Power Limited-Riser) meet characteristics defined under UL 1424. This cable is intended for installation in vertical runs which the length exceeds one floor. This is specified in section 760-154(B) of the National Electrical Code ANSI/NFPA 70. These cables also meet UL 1666 meaning that fall within flame-propagation height rules.
SK-FIRE-CO-W Addressable Combination Fire/CO Detector
The SK-FIRE-CO-W is an addressable combination fire and CO detector that can detect and send separate signals for fire and CO. This multi-criteria detector uses four sensing technologies (photoelectric, infrared, heat, and CO) to accurately detect fire and CO alarm conditions with a high immunity to false alarms. When paired with the B200S-WH sounder base or B200S-LF-WH low frequency sounder base, the SK-FIRE-CO-W can generate unique alarms for fire and CO events (bases sold separately). Now available with a modern white finish and a 10-year CO cell. Compatible with 5000 and 6000 Series addressable fire alarm control panels using SK protocol.
SK-PHOTO-W Series Addressable Photoelectric Smoke Detectors
The SK-PHOTO-W Series addressable plug-in smoke detectors are designed for both performance and aesthetics. A new modern, sleek, contemporary design and enhanced optical sensing chamber are engineered to sense smoke produced by a wide range of combustion sources in accordance with more stringent code standards. Models include the SK-PHOTO-W photo detector, SK-PHOTO-T-W photo thermal detector and SK-PHOTO-R-W remote test capable detector for use with DNR(W).
WSK-PHOTO / WSK-PHOTO-T SWIFT Photoelectric Smoke Detectors
WSK-PHOTO and WSK-PHOTO-T addressable, wireless photoelectric detectors use a state of the art photoelectric sensing chamber to provide open area protection. The WSK-PHOTO-T adds thermal sensors that will alarm at a fixed temperature of 135ā°F (57ā°C). The WSK-PHOTO and WSK-PHOTO-T communicate with the fire alarm control panel (FACP) through a wireless mesh network to the WSK-WGI wireless gateway. Note: Must be used with Silent Knight 6000 Series addressable fire alarm control panels.
WSK-PULL-DA SWIFT Pull Station
The WSK-PULL-DA wireless addressable pull station is a dual-action manual pull station with a key-lock reset feature. Rotary dial switches are provided for setting the pull stationās address. The WSK-PULL-DA communicates with the fire alarm control panel (FACP) through a wireless mesh network to the WSK-WGI wireless gateway. Note: Must be used with Silent Knight 6000 Series addressable fire alarm control panels.
